Mazda 323 BF 2WD 86-89 UltraRacing Rear Upper ...

2.589,-

Mazda MX5 90-91 Silicone Heater Hose Set Black ...

1.551,-

Mishimoto Mazda Miata heater hoses are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all designed and engineered for a direct OEM fit.   Direct fit for 1990-1991 Mazda Miata INNER DIAMETER: 0.63" OUTER DIAMETER: 0.94" Maximum Temperature: 330°F Constructed with high grade silicone and heat-resistant embedded fibers Mishimoto Lifetime Warranty

Mazda MX5 90-98 Seibon OEM Carbon Hood

32.687,-

Mazda MX-5 90-95 MR Race-Spec Front Upper ...

2.258,-

One-Piece Race Spec Strut Tower Bar constructed of strong Aluminum to extremely tight tolerances and then polished to perfection. Designed to tie the chassis from left to right at critical stress points (Between the shock/strut towers). As you drive and maneuver, your car undergoes many different forces that the chassis of the car absorbs; the brace helps to absorb the energy and directs these forces into your suspension components so that they can better do their job and serve their purpose more effectively. A must for any track-driven, and a great addition to any street or show car, this bar truly lives up to the Megan Racing name.

Mazda MX-5 90-97 Fan Shroud Kit Mishimoto

4.198,-

The Mishimoto Mazda Miata Fan Shroud Kit will considerably improve engine cooling functions and the overall performance of your vehicle. All Mishimoto fan shrouds are significantly lighter than standard fan shrouds, and are a direct stock fit. A Mishimoto fan shroud will effectively drive out heat from the engine bay and deliver a significant amount of cooler air directly to the Miata aluminum radiator. At the same time the fan shroud serves another very important purpose: securing the fan blades. The fan shroud will keep the fan blades in place, which otherwise could potentially damage other essential components in your engine. All Mishimoto aluminum fan shrouds include an adhesive protective strip. This adhesive-backed foam strip seals any remaining gap between the fan shroud and radiator so that the fans are only moving air that has passed through the radiator core as opposed to pulling in air from the engine bay, resulting in improved cooling efficiency.   Direct fit for the 1990-1997 Mazda Miata Overall size: 15.8" x 25.2" x 3.5" Maximizes airflow with CFM of 2300 Includes aluminum fan shroud and two 12" slim electric fans Mishimoto Lifetime Warranty

Mazda MX5 89-93 Silicone Radiator Hose Kit Red ...

2.099,-

Mishimoto Mazda Miata heater hoses are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all designed and engineered for a direct OEM fit.   Direct fit for 1990-1993 Mazda Miata Maximum Temperature: 330°F Constructed with high grade silicone and heat-resistant embedded fibers Increases heat and pressure tolerance Mishimoto Lifetime Warranty

Mazda MX5 89-97 Altezza Style Tail Lights ...

3.648,-

Mazda MX5 90-93 Front Lower Arm Repair Kit Megan ...

4.340,-

Mazda MX5 90-97 M anual Aluminum Radiator ...

5.931,-

Mazda MX5 90-97 Manual Aluminum Radiator ...

5.250,-

By replacing your current Miata radiator with a Mishimoto performance aluminum radiator you will undoubtedly notice a cooler more efficient running engine. All Mishimoto Mazda Miata performance aluminum radiators are designed and engineered to maximize cooling efficiency, protect your car from the overheating, and boost overall engine functions. With its lightweight dual core, 100% brazed aluminum, and polished tank ends installing a direct OEM fit Mishimoto radiator is effortless, no cutting or modification is required. All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and, as with every Mishimoto aluminum radiator, this radiator includes the Mishimoto Lifetime Warranty. Check out the Mazda Miata hose kit, for even greater cooling efficiency.   Direct fit for the 1990-1997 Mazda Miata 1.6L/1.8L Overall Size: 27.8" x 18" x 2.55" / Core Size: 12.6" x 25.12" / Rows: 2 Inlet & Outlet: 1.25" / Core Thickness: 1.97" / Tank Wall Thickness: 0.08" TIG-welded aluminum radiator includes high-pressure rad cap and magnetic drain plug Mishimoto Lifetime Warranty  

Mazda MX5 90-97 Megan Racing Short Shifter

1.378,-

Mazda MX5 94-98 Silicone Radiator Hose Kit Blue ...

1.764,-

Mishimoto 94-97 Miata silicone hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with designed and engineered for a direct OEM fit. The perfect replacement to the stock Miata hoses.   Direct fit for 1994-1997 Mazda Miata Maximum Temperature: 330°F Constructed with high grade silicone and heat-resistant embedded fibers Increases heat and pressure tolerance Mishimoto Lifetime Warranty

Mazda MX5 94-98 Silicone Radiator Hose Kit Red ...

2.099,-

ishimoto Miata silicone heater radiator hose sets are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your Mazda Miata.   Direct fit for 1994-1997 Mazda Miata Maximum Temperature: 330°F Constructed with high grade silicone and heat-resistant embedded fibers Increases heat and pressure tolerance Mishimoto Lifetime Warranty

Mazda MX5 BP/B6 1.8 Comp. Clutch Ultralight ...

6.696,-

Mazda MX5 NC 2.0 5S Comp. Clutch Stage 2 Brass ...

7.698,-

Series: Stage 2  Street Series 2100 Clutch Kit This assembly provides up to 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. 300-mile break-in REQUIRED with this set-up. (Some kits may not be supplied with all pieces. Please verify with Competition Clutch before ordering). The 2100 Series kit includes a performance pressure plate, a high torque sprung disc with anti-burst steel backed Brass Plus facings, all applicable bearings, and the appropriate alignment. General Competition Clutch Info: Competition Clutch (CCI) is the fastest growing performance clutch company worldwide. They are quickly becoming the choice clutch employed by several race teams, as well as weekend grassroots racers. Competition Clutch contributes this growth to its commitment in the quality of their products, and their high standards in customer service. If it's time to replace your clutch, take comfort in knowing that you're getting a quality product you can depend on. Competition Clutch specializes in manufacturing sport compact assemblies from street driven to full race applications. You will find our products being proudly used in some of the fastest sport compact race cars in the country, including a number of the most recognized industry icon vehicles. Competition Clutch brings to their customers the finest materials, workmanship, and the best customer service in the industry. We offer higher clamping force, stronger disc designs, and uncompromised satisfaction, all at the most competitive pricing in the industry. Specifications: Series Info: Stage 2 - Sprung Steelback Brass Plus Engine/Gearbox Extra Info: 2.0L (NC, 5 speed) Max Torque: 305NM Competition Clutch Product Nr.: 10060-2100 Flywheel Included: No Technical instructions/information: See http://competitionclutch.com/csindex.php?vn=techpage

Mazda MX5 NC 2.0 5S/6S Comp. Clutch Light ...

6.417,-

Series: Flywheels Competition Clutch flywheels are made of 4140 forged steel and are a one-piece design. This helps significantly in reducing the chances of ring gear separation and friction surface warpage. All flywheels can be resurfaced. The correct flywheel step can be obtained in the CCI catalog or by calling us direct. Flywheel weights vary from 8lbs to 18lbs depending on application. The lightweight steel flywheel (ST suffix) is recommended for naturally aspirated and/or street driven applications. This flywheel preserves low-end torque and driveability. Well-suited for Gravity, Stage 1 and Stage 2 clutch applications. The ultra lightweight steel flywheel (STU suffix) is recommended for forced induction and/or track and rally racing applications. This flywheel is machined with less material to assist in quicker revving capabilities.  Well-suited for Stage 3 and up clutch applications. These flywheels will work with ALL performance and stock clutch assemblies. Not all applications have the ST and STU versions available. Please verify before ordering. All flywheels are SFI certified.   General Competition Clutch Info: Competition Clutch (CCI) is the fastest growing performance clutch company worldwide. They are quickly becoming the choice clutch employed by several race teams, as well as weekend grassroots racers. Competition Clutch contributes this growth to its commitment in the quality of their products, and their high standards in customer service. If it's time to replace your clutch, take comfort in knowing that you're getting a quality product you can depend on. Competition Clutch specializes in manufacturing sport compact assemblies from street driven to full race applications. You will find our products being proudly used in some of the fastest sport compact race cars in the country, including a number of the most recognized industry icon vehicles. Competition Clutch brings to their customers the finest materials, workmanship, and the best customer service in the industry. We offer higher clamping force, stronger disc designs, and uncompromised satisfaction, all at the most competitive pricing in the industry. Specifications: Series Info: Lightweight Flywheel - 5.53kgs Engine/Gearbox Extra Info: 2.0L (NC, 5 speed+6-speed) Max Torque: NM Competition Clutch Product Nr.: 2-10060-ST Flywheel Included: Of course, this is a flywheel ;) Technical instructions/information: See http://competitionclutch.com/csindex.php?vn=techpage

Viser 1 til 16 (av 210 produkter)